This project is for Heilongjiang Province Undergraduate Electronic Design Contest in 2014, as a group of 3, we built a metal detector with a four-bar metal frame which can detect the metal in a fixed size area. We use the module AY-LDC1000, 2 stepping motors with driver STP-MD415 and STM32F103Rx as microcontroller. The goal is to detect…
In the student training program(2013-2014), I designed an all terrain robot with two pedrail attached to its chassis, and used many sensors to achieve various functions. It could be controlled by voice, bluetooth, 2.4g with the remoter I designed. Also it was equipped with a camera with a WIFI board through which we could watch…
During the development of multi-feet and humanoid robot (2013-2016), I also developed some other modules that increase the functionality and playability of the robot. 1. Voice recognition module based on chip LD3320 Schematic and real one: 2. Voice record and play based on ISD1820 Schematic and real object: 3. 2.4G Wireless send and receive module…
In this project(2013-2015), I and other members from IRC designed a general version of four-feet robot with a steady electrical system. Then based on different creatures, we changed the structure and made them into several kinds of robots, including dog, panda, etc. There are two kinds of material for the robot: Acrylonitrile-butdiene-styrene(abs) and Aluminum alloy.…
This is my undergraduate thesis project guided by Prof. Feng (based on China NSF 61074015). 1.Main target : Use a high-order sliding mode control strategy to control an induction motor servomechanism with a terminal sliding mode observer to see the parameters in real time and simulate to analyze its performance. 2.Controller: First, build the induction…
This is the main product of the startup in my undergraduate time(2013-2016). I mainly responsible for the electrical part (including main controller design, modules&sensors development), help with the mechanical design and the software development. 1.A version of control board schematic I had patents for utility models with others in servos and robot structure. 2.Some…
During part of my undergraduate time(2013-2015), I was making a startup with friends from our robotic club, and beside of the main projects we employed in the company, there were some other products we designed. One of my ideas is the small rescue robot. The idea come from the news that in 2013 there were…
Accomplished: 2-D soft robotic snake model and validate (already finished, paper submitted to 2019 ICRA) 2-D soft robotic snake motion planning (finished, submitted to IJRR journal) Ongoing: 1. 3-D curvature sensor：making modules, prepare to make a chain and experiment, then write a paper. 2. SMA actuator chain: modules already fabricated, single module experiment already accomplished,…
